Home
Company
Products
Metrology services
3D Gallery
News
For the press
Downloads
Contact
Masthead
 
Deutsche Version
 
3D-Shape GmbH
Am Weichselgarten 21
D-91058 Erlangen
Germany

Phone: +49-9131-977 959-0
Fax: +49-9131-977 959-11
E-mail: info@3d-shape.com
  
 
KORAD3D
µKORAD3D
KorMASTER3D
FaceSCAN3D
BodySCAN3D
CAM3D
SCAN3D
SpecGAGE3D
SLIM3D
3DViewer

Products > µKORAD3D
Introduction Principle Applications
Specifications Examples

 
µKORAD3D

3D-Shape GmbH presents µKORAD3D, a flexible and robust optical 3D measurement system for micro-scopic applications.
User-friendly interfaces enable simple use:
· Direct control via laptop
· Remote control via DCOM interface
· Application in the laboratory and on the pro-duction line

Further details can be found in the PDF file of the product flyer.

 
Measurement principle

The measurement procedure is based on the princi-ple of white-light interferometry and allows a full-area surface measurement with a measurement uncertainty down to the nanometer range.

 
Applications

µKORAD3D can be used for random sampling applications and for 100% quality control on the production line. In contrast to touch-probe measurement systems, not only a profile line, but also an entire area is available for evaluations.

 
Specifications

- Measurement speed: up to 30 µm/s
- Lateral field of view: 0,2-2,5 mm²
- Lateral resolution (depending on field of view): 0,2-3 µm
- Longitudinal measurement range: up to 300 µm
- Measurement uncertainty: down to the nm range
- Software: SoftKORAD3D (controllable via DCOM interface)

 
Measurement Examples

Bumps The example on the left illustrates the measurement of a component from the electronics industry. Sur-face parameters, such as diameter and height, can be calculated from the measurements.
Click the images to magnify them.
On the metal surface with milling grooves displayed on the right, the roughness parameters Ra, Rz, ... can be determined along profile lines. Furthermore, the 3D roughness parameters Sa, Sz, ... can be calculated
Click the images to magnify them. 		Höhenbild einer Metalloberfläche

We will gladly perform test measurements of sample parts to demonstrate the capabilities of µKORAD3D for your application. Further fields of view and longitudinal measurement ranges can be implemented as needed. Simply send your query to info@3d-shape.com.
Print version

µKORAD3D
 

Profilschnitt durch nebenstehende Messung
  Profile section through adjoining measurement

Profilschnitt durch nebenstehende Messung
  Profile section through adjoining measurement